* switch linux CI extra_tests and coverage builds to cmake.
* add ninja to linux coverage install list
* add qt serial for coverage build
* add webengine for coverage build
* actually fail when ubsan finds an error!
* avoid divide by zero error in kml writer.
* teach camke that the check target uses the console.
this lets the test output show up as the tests run instead of
delaying it all until the end.
- name: install
run: |
sudo apt-get update
- sudo apt-get install gcovr lcov libusb-1.0-0-dev qt5-default
+ sudo apt-get install gcovr lcov libusb-1.0-0-dev qt5-default qtwebengine5-dev libqt5serialport5-dev ninja-build
- name: Checkout repository
uses: actions/checkout@v3
list(APPEND LIBS ${GPSBABEL_EXTRA_LINK_LIBRARIES})
set(GPSBABEL_EXTRA_INCLUDE_DIRECTORIES "" CACHE STRING "extra directories to include.")
target_include_directories(gpsbabel PRIVATE ${GPSBABEL_EXTRA_INCLUDE_DIRECTORIES})
+set(GPSBABEL_EXTRA_COMPILE_OPTIONS "" CACHE STRING "extra compile options.")
+# Qt sanitize.conf used:
+# -fsanitize=address -fno-omit-frame-pointer
+# -fsanitize=undefined -fsanitize=float-divide-by-zero -fno-omit-frame-pointer
+# For coverage use --coverage
+separate_arguments(GPSBABEL_EXTRA_COMPILE_OPTIONS)
+target_compile_options(gpsbabel PRIVATE ${GPSBABEL_EXTRA_COMPILE_OPTIONS})
+set(GPSBABEL_EXTRA_LINK_OPTIONS "" CACHE STRING "extra link options.")
+# Qt sanitize.conf used:
+# -fsanitize=address
+# -fsanitize=undefined -fsanitize=float-divide-by-zero
+# For coverage use --coverage
+separate_arguments(GPSBABEL_EXTRA_LINK_OPTIONS)
+target_link_options(gpsbabel PRIVATE ${GPSBABEL_EXTRA_LINK_OPTIONS})
set(SOURCES
${SOURCES} ${ALL_FMTS} ${FILTERS} ${SUPPORT} ${SHAPE} ${ZLIB} ${JEEPS} ${RESOURCES}
${CMAKE_SOURCE_DIR}/testo -p $<TARGET_FILE:gpsbabel>
DEPENDS gpsbabel
WORKING_DIRECTORY ${CMAKE_SOURCE_DIR}
- VERBATIM)
+ VERBATIM
+ USES_TERMINAL)
endif()
if(UNIX AND NOT APPLE)
# This test only works if the pwd is top level source dir due to the
kml_td(hwriter, QStringLiteral("Max Speed"), QStringLiteral(" %1 %2 ").arg(QString::number(spd, 'f', 1), spd_units));
}
if (td->max_spd && td->start.isValid() && td->end.isValid()) {
- const char* spd_units;
double elapsed = td->start.msecsTo(td->end)/1000.0;
- double spd = fmt_speed(td->distance_meters / elapsed, &spd_units);
- if (spd > 1.0) {
- kml_td(hwriter, QStringLiteral("Avg Speed"), QStringLiteral(" %1 %2 ").arg(QString::number(spd, 'f', 1), spd_units));
+ if (elapsed > 0.0) {
+ const char* spd_units;
+ double spd = fmt_speed(td->distance_meters / elapsed, &spd_units);
+ if (spd > 1.0) {
+ kml_td(hwriter, QStringLiteral("Avg Speed"), QStringLiteral(" %1 %2 ").arg(QString::number(spd, 'f', 1), spd_units));
+ }
}
}
if (td->avg_hrt) {
# output is conditionally mailed to gpsbabel-code.
#
+SOURCE_DIR="$(cd "$(dirname "${BASH_SOURCE[0]}" )/.." && pwd)"
+
# echo some system info to log
uname -a
if [ -e /etc/system-release ]; then
if [ -e /etc/os-release ]; then
cat /etc/os-release
fi
-git --no-pager log -n 1
+git -C "${SOURCE_DIR}" --no-pager log -n 1
# build and test keeping output within the pwd.
-export GBTEMP=$(mktemp -d -p $(pwd) GBTEMPXXXX)
+GBTEMP=$(mktemp -d -p "$(pwd)" GBTEMPXXXX)
+export GBTEMP
+rm -rf bld-sanitizeaddress
+mkdir bld-sanitizeaddress
+pushd bld-sanitizeaddress
#note that debug will also enable assertions.
-qmake "CONFIG+=debug sanitizer sanitize_address"
-make clean
-make -j 3
-make check
+cmake -DCMAKE_BUILD_TYPE=Debug -DGPSBABEL_EXTRA_COMPILE_OPTIONS="-fsanitize=address -fno-omit-frame-pointer" -DGPSBABEL_EXTRA_LINK_OPTIONS="-fsanitize=address" -G Ninja "${SOURCE_DIR}"
+cmake --build . --target gpsbabel --verbose
+cmake --build . --target check
+popd
+
+rm -rf bld-sanitizeundefined
+mkdir bld-sanitizeundefined
+pushd bld-sanitizeundefined
+cmake -DCMAKE_BUILD_TYPE=Debug -DGPSBABEL_EXTRA_COMPILE_OPTIONS="-fsanitize=undefined -fsanitize=float-divide-by-zero -fno-sanitize-recover=undefined,float-divide-by-zero -fno-omit-frame-pointer" -DGPSBABEL_EXTRA_LINK_OPTIONS="-fsanitize=undefined -fsanitize=float-divide-by-zero -fno-sanitize-recover=undefined,float-divide-by-zero" -G Ninja "${SOURCE_DIR}"
+cmake --build . --target gpsbabel --verbose
+cmake --build . --target check
+popd
-qmake "CONFIG+=debug sanitizer sanitize_undefined"
-make clean
-make -j 3
-make check
+rm -rf "${GBTEMP}"
# run clazy on both gpsbabel and gpsbabelfe.
# unlike qmake, cmake uses system includes for Qt which quiets warnings
# from the Qt headers.
+rm -rf bld-clazy
+mkdir bld-clazy
+pushd bld-clazy
export CLAZY_CHECKS=level0,level1,no-non-pod-global-static,no-qstring-ref
-cmake . -DCMAKE_CXX_COMPILER=clazy -G "Ninja" -DCMAKE_BUILD_TYPE:STRING="Debug"
-cmake --build . --target clean
+cmake -DCMAKE_CXX_COMPILER=clazy -DCMAKE_BUILD_TYPE=Debug -G Ninja "${SOURCE_DIR}"
cmake --build . 2>&1 | tee clazy.log
if grep -- '-Wclazy' clazy.log; then
exit 1
else
exit 0
fi
-
# as of 6/18/2018 you must use java 8, see issue #76, #83 at https://github.com/codacy/codacy-coverage-reporter/issues
# as of 3/16/2019 with coverage reporter 4.0.3 java 8 is not required.
-qmake
-make -j 3 coverage
+SOURCE_DIR="$(cd "$(dirname "${BASH_SOURCE[0]}" )/.." && pwd)"
+BUILD_DIR="$(pwd)/bld-coverage"
+
+rm -rf "${BUILD_DIR}"
+mkdir "${BUILD_DIR}"
+cd "${BUILD_DIR}"
+
+cmake -DCMAKE_BUILD_TYPE=Release -DGPSBABEL_EXTRA_COMPILE_OPTIONS="--coverage" -DGPSBABEL_EXTRA_LINK_OPTIONS="--coverage" -G Ninja "${SOURCE_DIR}"
+cmake --build . --target check
+lcov --capture --directory "${BUILD_DIR}" --base-directory "${SOURCE_DIR}" --no-external --output-file lcov.info
+genhtml lcov.info --demangle-cpp --output-directory coverage_report
# debug tokens
-"$(cd "$(dirname "${BASH_SOURCE[0]}" )" && pwd)"/ci_tokens
+"${SOURCE_DIR}"/tools/ci_tokens
#!!!!!!!!!!!!!!!!!!!!!!!!!!!!
# don't leak unhashed tokens!
# by substituting x for the token if the token is set and not null.
if [ -n "${CODACY_PROJECT_TOKEN:+x}" ] ; then
# upload coverate report to codacy.
- bash <(curl -Ls https://coverage.codacy.com/get.sh) report -l CPP -r gpsbabel_coverage.xml
+ bash <(curl -Ls https://coverage.codacy.com/get.sh) report -l CPP -r lcov.info
else
echo "Skipping codacy coverage upload as CODACY_PROJECT_TOKEN is not set."
fi
projects / gpsbabel.git / commitdiff